Home Feed Back Search What's New

  ARC/Cessna

megabannerrbottom.gif (913 bytes)

Up
Printable Directions

ARC/CESSNA CA-295B  (200A Navomatic - Wide ) -  Faceplate insert Price $28.50)

Material - .032" Matte black / white text, 1 piece. Backed with double faced tape for easy installation. 

NOTE: To distinguish between the narrow or wide faceplate versions 

CA-295A insert is 4.770" wide, which is narrower than the standard width avionics.

CA-295B insert is 6.530" wide. It also has white graphics lines on both side to decorate the wider expanse.

 

ARC/CESSNA CA-295B  (200A Navomatic - Wide ) Faceplate installation directions

Before you begin: Check to see if you received the proper faceplate insert. Are the numbers the same as your radio? Does it fit correctly? Although the holes and text will be the same, many faceplate manufacturers made different widths or heights of the same faceplate. (Just to make life a little more interesting)

1. Have this insert installed by an avionics shop if you do not have all the proper tools, are not a qualified technician or are not sure you are capable of doing this job. 
2. Remove the knob.
3. If your faceplate does not need painting go to #8. Tape up the center glass area to protect it from painting. Do not tape the inside lip area as this has to be painted. Also tape the backside to protect from any paint over spray.
4.

Fill any dents with a plastic filler or similar material.

5. Lightly sand with a fine grit sandpaper for good paint adhesion.
6. Paint the faceplate with a quality paint such as Krylon'sŪ 1613 Semi-Flat Black paint.
7. Remove the protective tape.
8. Remove the double face tape backing from the new inserts.
9. Place the new inserts onto the faceplate. Reinstall the knob onto the radio.
10. Tell all your aircraft buddies about Aircraft Engravers and place the enclosed sticker on the metal case for future reference.


 

   
   
megabottomleft.gif (3311 bytes)   megabottomright.gif (3325 bytes)