PIPER
ALTIMATIC III Series Faceplate Inserts
PIPER
ALTIMATIC III - Faceplate insert
(Price
$33.75)
Material -
.032" Matte black / white text, 1 piece
PIPER
ALTIMATIC IIIB- Faceplate insert
(Price
$33.75)
Material -
.032" Matte black / white text, 1 piece
PIPER
ALTIMATIC IIIC- Faceplate insert
(Price
$33.75)
Material -
.032" Matte black / white text, 1 piece
The graphics image
for ALTIMATIC IIIC will be added here.
 |
|
PIPER
ALTIMATIC III, IIIB, IIIC Faceplate installation
directions
Before you begin: Check to see if
you received the proper faceplate insert. Are the numbers
the same as your radio? Does it fit correctly? Although
the holes and text may be the same, many faceplate
manufacturers made different widths or heights of the same
faceplate. (Just to make life a little more interesting.)
1. Remove your faceplate from radio.
2. Sand off the top painted surface of the old faceplate.
This will provide necessary illumination of text for
replacement faceplate insert.
3. Remove the double-face tape backing from the new
insert.
4. Place the new insert onto the faceplate lightly to
align as best as possible. Press firmly to secure it.
5. To stop any light from bleeding
out the edges or holes, carefully apply some black paint
around these edges. Use a Testor'sŪ black paint stick or
similar brand found in most hobby stores.
6. Reinstall faceplate on the radio.
7. Re-install all the knobs onto the radio.
8. Tell all your aircraft buddies about Aircraft Engravers
and place the enclosed sticker on the metal case for
future reference. |
